2020 Silent Yachts Silent 80

The following technical specifications ("Specifications") describe in detail the technical elements of the construction of the Solar Yacht SILENT 80.

All components are marine grade and have a CE certificate, wires copper and tin coated, stainless steel ASI316 or higher, all visible ss-part polished.

SILENT 80 has been designed and is built in accordance with the ISO rules and in compliance with the safety standards according to the 94/25/CE directive.

• Length overall 24,30 m 79,8 ft
• Length of waterline 24,20 m 79,4 ft
• Beam overall 10,92 m 35,8 ft
• Draft 1,20 m 3,93 ft
• Deck to waterlevel (bow) 2,70 m 8,86 ft
• Deck to waterlevel (cockpit) 2,02 m 6,63 ft
• Bridgedeck hight 1,20 m 3,93 ft
• Hight over all 5,50 m 18,0 ft
• Light displacement *) 48 tons
• Water *) 1.000 Liter 264 gal
• Waste-water *) 4x 500 Liter 4x 132 gal
• Fuel *) 2x 1.500 Liter 2x 396 gal
• Standard motors (electric) 2x 80 kW Battery capacity 240 kWh
• CE Certification A: 12; B: 18; C: 24; D: 40 *)

Light displacement and performance predictions subject to change due to specification of vessel.

• 2 x 80 kW electric motors
• Cruising speed 8-10 kts
• Top speed 12 kts
• High-efficiency propellers on shafts.

Before the delivery the shipyard will carry out the following test:

• Preliminary test of the electrical system
• Preliminary test of the hydraulic system
• Preliminary test of propulsion system
• Test for all maneuvering
• Test of speed at different rpm
• Test and commissioning of electronics systems
• Compass compensation
• Control and check of the correct installation and operation of all components

• Light weight glass/carbon sandwich composite construction
• Resin infusion and Vacuum bagging for strong and lightweight structure
• High quality and osmosis free vinyl Esther resin.
• Watertight bulkheads in several sections and collision-compartments for ultimate safety
• Reinforced stub keel Foam sandwich structure of boat acts as thermal and sound insulation
• Additional thermal insulation between hull and furniture/wall and ceiling covers, >50 mm + aluminum moisture barrier - all around the hull and superstructure.
• Furniture with foam or honeycomb inside where applicable, all parts where hinges/ locks ... have to be mounted are in special light weight plywood. 
• Heavy plywood shall only be used in places where it is mandatory Gelcoat color acc. RAL for all glass fiber reinforced plastic parts Built in accordance with CE regulations. USCG and MCA on Request.

The insulation system has the purpose to ensure maximum comfort on board

Accommodation

• For each cabin, a thermal insulation sandwich is installed into the bulkheads and flooring, additional thermal insulation on all hull and ceiling surfaces;

Engine Room

• Gas exhaust piping will be covered with thermal insulation sandwich for an optimum thermal insulation.
• All components of the exhaust system (hose, water lock, gas-water-separator, muffler) will be supported by visco-elastic elements / rubber supports, the generator with a double layer of rubber supports.
• Extraction and ventilation ducts realized with thermal insulation sandwich secured with needles.
• Sides, ceilings and bulkheads will be covered with thermal insulation sandwich secured with needles finished with aluminum plates secured in aluminum grid supports.

• 1x Sunbed 3.100 x 3.150 mm, behind flybridge with foldable backrests and upholstered cushions (see "fabric" under 5.5.1 for reference)
• Weathertight storage underneath the sunbed (with drainage)
• 1x Molded U-shaped sofa with backrests and cushions (see "fabric" under 5.5.1 for reference)
• 1x GRP table and height adjustable manual table Pedestal
• 1x Storage cabinet, (optional) fridge and sink with foldable faucet
• 1x Mast acc. specification of nav. equipment, s/s for Radar, Antennas and lights
• 1x Flagpole at center
• 1x Flybridge ladder with s/s base, teak stairs and s/s handrail
• All deck hinges with hidden bolts, heavy duty, polished
• All hatches lockable and equipped with gas pistons
• LED downlights above the dining table, mood-lights around the flyroof, courtesy light all around the fly and on each step
• Switches for all consumers on the fly (lights and 2 main switches for nav. instruments, horn)
• Foldable captains’ bench and Control panel

• 3x Molded side deck sofas with cushions (see "fabric" under 5.5.1 for reference
• Lockers all around the deck house, each with drainage and gas supported lid - intended to be used for ropes, fenders, life jackets
• S/S handrail all around the deck
• Fixed windows in tempered-stratified-glass, bended in one direction, colored and sun protection
• LED courtesy lights and spotlights on external port and starboard walkways (ceilings and walkway sides) - see 7.2 for reference.

• 1x molded U-shaped sofa with backrest and upholstered cushions on starboard (see "fabric" under 5.5.1 for reference)
• 2x sunbed left and right of U-sofa
• 2x deck hatch to crew cabin
• 1x 24 V 2.000-3.000 W "Italwinch", electrical vertical type - or equivalent; anchor windlass (chain and rope) with anchor stopper and 320 mm steel bollard, controls both locally and from the steering station
• 2x forepeaks / storage with access hatch, LED light + switch inside and s/s ladder
• 1x weathertight access hatch to anchor winch and chain locker (on deck), LED-light in the chain locker
• Access to the anchor chain to connect the bridle
• Hose pipe (chain guide) for anchor
• 2 Padeyes on the inner side of the bow tips for a bridle
• 9 x 400 mm Steel bollards with engraved Silent-Yachts logo
• 2x Roller fair leads

• 1x molded sofa with upholstered cushions on port side, can be upgraded to a bar with fridge and sink
• 1x molded U-shaped sofa with upholstered cushions on starboard
• 1x  teak table for 10-12 persons
• 1x stern sofa with foldable backrest and upholstered cushion
• 2x roof support poles
• 4x 400 mm AISI 316L bollards with engraved Silent Yachts logo
• 2x roller fairleads
• 1x  sliding saloon door
• 2x sliding windows as a wind and rain protection at the cockpit sides
• Molded box with GRP lid in the cockpit ceiling as storage for an (optional) sun awning
• Optional bar block partly replacing the molded sofa on the port side with storage, electric grill, acrylic stone sink and worktop, fridge, lockable
• Dimmable LED spotlights + mood light in ceiling (see 7.2 for reference)
• Switches for the cockpit lights
• Molded lateral fiberglass stairway (first 4 steps), all other steps inox + teak top with handrail to fly bridge
• 2x Molded fiberglass stairs from aft deck to stern platform, hydraulically liftable
• 1x Locker for 2 x 220V sockets (shore supply for onboard services and air conditioning) located on the transom
• 1x Locker for dock water connection tap
• 1x Hot/cold hand shower on each aft platform
• Swimming ladder support installed on platform (1 x removable manual swimming ladder in stainless steel and teak included) + CE emergency ladder
• 2x light bollards on stern platform (NOT for mooring, tender or PWC only use)
• Dedicated storage for two life rafts for 8 persons each, lockable

• Deck hatches Lewmar flush3G
• All glass in hull and superstructure of same appearance, slight mirror effect, heat reflecting
• Glass in glass windows, 2 in each cabin
• Sliding stern door stainless steel frame, heavy duty, manually sliding from center to outside, 1 retractable window (moving down), one fixed window

Tender Garage:

The garage is placed in the port hull, access through a deck hatch and s/s ladder with teak steps. The tender launch / recovery system will be guaranteed by a system consisting of:

• Weathertight hydraulic stern hatch with a power pack for both hatches linked to power-pack of (optionally retractable) flybridge roof
• Electric windlass to pull the tender in
• Sliding rollers
• Lashing system when the tender is inside the garage
• 3x Waterproof LED light a 10 W with switch
• 1x 230 VAC socket in waterproof box
• 1x Fresh water hand-shower with cold/hot mixer
• Radio remote control + switches for opening the stern hatch and the electric windlass

The garage will be set up to receive a tender with a maximum length of 4,40 x 2,10 m e.g. Williams Sports tender 440 (supplied by the customer).

Technical Compartment :

Underneath the tender bay. Access through a weathertight door / hatch in the tender bay

• S/S stairs
• 3x Waterproof LED light a 10 W with switch
• 2 Automatic bilge pumps and alarm to bridge
• Access to the rudder system

Generator Room / Technical Compartment and Storage 

The generator and other technical equipment are placed in the stern compartment of the starboard hull.

Access through a deck hatch with s/s stairs and a hydraulic stern hatch with power pack for both hatches linked to power-pack of (optionally retractable) flybridge roof.

• Short s/s stair from the aft platform to the engine room
• 3x Waterproof LED light a 10 W
• 1x Electrical socket in waterproof box

Storage Under the Cockpit

Access through a flap in the transom behind the cockpit (approx. 2.000 x 500 mm) and two large hatches in the cockpit floor. This is intended to be used for water toys, SUP’s, kayaks.

• 3 LED lamps of ca. 10 W, switch
• 10 Padeyes to fix the stored items 

Saloon | Dining | Galley

• Wooden furniture with drawers and doors according to GA
• 1x Wooden dining table for 10 persons
• 1x 55" Samsung LED TV - or similar 
• 1x U -shaped dining sofa, upholstered in fabric 
• 1x C-shaped lounge sofa in the stern part of the salon, upholstered in fabric
• Wooden sofa-table

Galley build with characteristic as below:

• Door finishing in wood or lacquered

• Acrylic solid worktop 

• All galley appliances Miele, Bosch, Siemens or similar

• 1x 80 cm induction cooktop

• 1x dishwasher

• 1x 60 cm oven

• 1x air-extraction + hood

• 2x Hans Grohe or Kohler tap or similar

• 1x stone sink Blanco or similar

• 1x Fridge-freezer side by side Samsung (WLH) 900 x 750 x 1780 mm, 550-600 L, A++, chilled water, ice cubes

• Built-in stairs with handrail descending into the Crew cabin area
• Built-in stairs with handrail descending into the Guest / VIP and Master cabin area 
• LED ceiling spotlights 
• Light switches and 10 x VIMAR power sockets + 4 x USB sockets
• Ceiling panels in wood covered in synthetic leather
• Foldable fabric curtains , top + bottom rail + guide wires + side parts of the curtains hidden behind the wall- / ceiling covers
• Wooden floor and / or carpet flooring 

Pilot Station

• 1x ergonomic synthetic leather or fabric helm bench, min. 1300 mm wide, foldable armrests, foldable front part to lean on while standing, e.g. Besenzoni
• Control dashboard in synthetic leather and central panels in wood, including: ▪ Steering wheel ▪ 1x twin engine control throttles ▪ 1x motor and battery display▪ thruster, navigation lights, winch, wipers and horn controls ▪ alarm panels 
• Ceiling LED spotlights type A
• Ceiling panels in wood covered in synthetic leather 
• 2x VIMAR power sockets and panels light switches, 2 x USB sockets
• 4x windshields wipers

• Access from saloon/dining area via internal stairway
• 1x double bed with 4 base drawers and upholstered headboard, with high quality mattress (2.100 x 1.800 mm size), “Froli” aeration system
• Furniture in wood with drawers and doors 
• 1x office/vanity desk with chair
• Walk in wardrobe with sliding door with 3 x full-height closets
• 1x built-in sofa with cushions
• Ceiling panels in wood covered in synthetic leather
• Valances with folding curtains or Oceanair "Day and Night" blinds and shades
• 2x reading lights, one on each side of the bed
• LED ceiling spotlights (dimmable), indirect mood lights on the ceiling and under cabinets and bed, 2 dimmable circuits
• VIMAR power sockets (6) and panels light switches (4), 4 x USB sockets
• Wood or Carpet flooring

Master Bathroom

• Wood furniture with acrylic solid top
• 1x wash-basin- porcelain or bamboo
• 1x WC in a separate room, light and air extraction with switches inside the WC-room
• 1x shower cabin separated from the bathroom, min. height inside 2100 mm spotlight
• Wooden walls and furniture panels
• Lacquered wood ceiling panels
• 1x porthole curtain 
• LED ceiling spotlights
• 2x VIMAR power sockets and panels light switches
• Interior wood flooring
• Mirror and mirror light
• Taps 

▪ 1 shower mixer tap

▪ 1 adjustable height handheld shower head and rain shower (300 x 300 mm) inserted in the ceiling

▪ 1 wash basin mixer

• Bathroom accessories

▪ 1 shower soap basket

▪ 3 soap dispensers

▪ 2 towel rails, 1 x small electric towel dryer

▪ 1 toilet brush holder

▪ 2 bathrobe hooks

▪ 1 toilet paper holder

▪ 1 glass holder for 2 glasses

• Access from saloon/dining area via internal stairway
• Double bed or 2 x single beds with 4 base drawers and leather upholstered headboards, each with mattress (2100 x 90 mm)
• Furniture in wood with drawers and doors 
• Ceiling panels in wood covered in synthetic leather
• Valances with folding curtains or Oceanair "Day and Night" blinds and shades
• 2x reading lights, one on each side of the bed
• LED ceiling spotlights (dimmable), indirect mood lights on the ceiling and under cabinets and bed
• VIMAR power sockets (4) and panels light switches (6), 4 x USB sockets
• Wood or Carpet flooring

VIP Bathroom (For each cabin)

• Wood furniture with acrylic solid top
• 1x white porcelain or bamboo wash-basin
• 1x WC, air extraction
• 1x shower cabin, min. headroom 2100 mm, with full width glass wall and glass door with s/s hinges and lock, non-skid flooring in shower and LED spotlights
• Wooden walls and furniture panels
• Lacquered wood ceiling panels
• 1x porthole curtain suitable for bathroom
• LED ceiling spotlights
• 2 x VIMAR power sockets and panels light switches
• Interior wood flooring
• Mirror and mirror light
• Taps:

1 shower mixer tap

1 adjustable height handheld shower head and rain shower (300 x 300 mm) inserted into the ceiling

1 wash basin mixer

• Bathroom accessories

1 shower soap basket

3 soap dispensers

2 towel rails, 1 x small electric towel dryer

1 toilet brush holder

 2 bathrobe hooks

1 toilet paper holder

1 glass holder for 2 glasses

• Wood furniture with acrylic solid top
• 1x white porcelain or bamboo wash-basin
• 1x WC
• Wooden walls and furniture panels
• Lacquered wood ceiling panels
• 1 porthole curtain
• LED ceiling spotlights

Entrance via stairs from the salon and via a (removeable) s/s ladder with teak steps from the front deck.

Crew Cabin

• 1x queen-sized bed with mattress (200 x 140 cm), 4 drawers, slats underneath the mattress, can be lifted (hinges and gas pistons) for access to the storage under the bed 1x bed cushion and 1 x bed cover 
• 1x pullman bed (200 x 90 cm) 1 x bed cushion and 1 x bed cover
• 1x hanging locker
• LED ceiling spotlights 
• 2x reading light above the bed
• TV-set 30"
• Ceiling panels in wood covered in synthetic leather 
• 2x VIMAR power sockets and panels light switches
• 2x USB sockets
• Wood or carpet flooring 
• 1x hatch with mosquito net and blind (Oceanair "Skyscreen Roller Recessed")

Crew Utility Room

• Furniture in wood with drawers and doors
• Washing machine and separate dryer
• Fridge/freezer
• L-shaped sofa and dining table Ceiling panels in wood covered in synthetic leather 
• 6x VIMAR power sockets and panels light switches
• Wood or carpet flooring
• 1x hatch with mosquito net and blind (Oceanair "Skyscreen Roller Recessed")

Crew Bathroom

Bathroom Separated facilities with 

• 1x sink 1x WC  1x adjustable height shower head
• Furniture, wall and ceiling fixtures in laminated material
• Wooden ceiling panel 
• Laminate teak flooring 
• Bathroom accessories 

▪ 1 soap dispenser

▪ 2 towel rails

▪ 1 glass holder

▪ 1 toilet brush holder

▪ 3 bathrobe hooks

▪ 1 toilet paper holder

Electrical System DC:

• LED Navigation light Starboard + Port - FORCATO, Hella or similar
• LED Navigation light steam top light - FORCATO, Hella or similar
• LED Navigation light stern - FORCATO, Hella or similar
• LED Navigation light anchor - FORCATO, Hella or similar
• LED Emergency red flash light
• LED stern light min. 2 x 20 W Hella or similar
• Interior Ceiling light: "LED - Sextans Q" - 80 units, F&S 5080.C.3200 or similar
• Electric light dimmer (circuits) - 12
• Reading and chart lights - 12 units, F&S or similar
• LED strip - 28 m total length
• Generator-, tender- and technical compartments light LED, Hella (>IP65) or similar
• Exterior ceiling lights at cockpit and fore deck (F&S 6031.I.3200)
• Beauty lights at mirrors in each bathroom
• Linear drive console Flybridge - gas spring activated manually
• Windlass vertical
• Windlass footswitch (veer)
• Windlass footswitch (haul)
• Anchor remote control radio controlled
• 2 Switches on fly and inside helm incl. automatic fuse
• Light switches, 230V sockets and USB sockets - VIMAR Units of 2, 3, 4 throughout the boat
• 2 x grounding plates
• Magnetic compass at main helm and at fly helm
• Windscreen wipers s/s with water spray set, rubber wiper blades
• Generator starter battery - 105Ah 24V GEL - Starter Genset
• Battery switch
• Battery box and installation material
• Fuse box
• ATO fuses
• ANL fuses
• CarlingTech rocker switches at helm or similar
• Fanfare
• Electric valves for blackwater tanks, operated from main panel
• All lights high quality LED by Forresti & Suardi, Cantalupi or similar
• Bilge pumps with switch and fuse panel
• Bilge alarms with switch and fuse panel
• Pumps for black tanks with switch and fuse panel
• Tank sensor and alarm panel

Electrical System AC

• Oven (Miele Marine) - t.b.s.
• Induction cooktop (Miele Marine) - t.b.s.
• Side by side refrigerator (Samsung or LG) - t.b.s.
• Dishwasher (Miele Marine) - t.b.s.
• Washing-dryer (Miele Marine) - t.b.s.
• Wine cooler - t.b.s.
• AC Sockets inside - 4 x each cabin, 2 x each bathroom, 8 x salon
• AC main distribution box
• DC main distribution box
• Capacity indicator for all tanks and batteries with LCD screen
• Grounding plates 230 V
• Shore connection/socket - Marinco socket/Bipolar, single phase, 3 wire, stainless steel, IP 54
• Polarity detection for shore power - detection and change
• Lithium batteries 200kWh
• 100kW DC Generator
• 2x 85kW e-motors (135 kW peak)
• 64x SunPower X22 solar panels

• Headroom in the cabins, bathrooms and corridors 2.10 m
• Headroom in the crew area 1,95 m, front-cabin bathrooms 1,95 m
• Headroom in the saloon / pantry: approx. 2.20 m
• Width of door openings (final opening inside of the installed doorframe) min. 600 mm
• Large port lights and one glass in glass porthole in all cabins
• Deck-hatches in all cabins incl. crew area integrated 'flush deck' with mosquito net and blind (Oceanair "Skyscreen Roller Recessed")
• Natural aeration and forced aspiration-system in all cabins / bathrooms
• Interior furniture built in lightweight materials, light plywood, balsa, foam core or honeycomb where applicable
• All walls lacquered or covered with wood, vinyl leather or Alcantara materials
• Standard interior with mix of modern veneer with white lacquered surfaces and wooden floors. Decor wall panels in vinyl leather optic. Stainless steel / carbon optic applications inside
• Wooden floor
• Hand rails in s/s, covered with leather at stair cases
• All cabin- and bathroom doors in light weight material, high quality, soft closure, magnetic fixation
• Shadow blinds for all windows (Oceanair)
• Skyscreen for all deck hatches incl. Moskito net (Oceanair)
• Shower door, Hafele: 988.19.992 (or sim.)
• Towel holder, Hafele: 988.14.512 (or sim.)
• Soap container, Hafele: 980.60.012 (or sim.)
• Tooth brush glass, Hafele: 980.60.022 (or sim.)
• Toilet brush, Hafele: 980.60.312 (or sim.)
• Toilet paper roller, Hafele: 980.60.302 (or sim.)
• Grab rail, Hafele: 980.64.432 for shower (or sim.)

Upholstery, blinds and fabrics

All the sofas, chairs, armchairs and bed heads can be selected by the customer amongst the standard decor and material samples or similar present at the shipyard showroom. All leather or artificial leather parts with double stitch at all edges and corners.

• Folding curtain's fabric:           FOCUS LAB 753 Décor Panama 200cs
• External covers in fabrics:       ITALVIPLA mod. Tropical fabrics water resistant
• Synthetic leather:                    ITALVIPLA art. Ultraflex Z3 or similar 
• Internal fabrics:                       ACRO coll. Chiara art. 5306 -or similar
• Crew quarter fabric:              ACRO coll. Chiara art. 5342 -or similar

Floors

The floors are covered with:

• Floor carpets: synthetic carpet in all guest areas BESANA mod. 8 Silk   prestige line or similar 
• Interior wood: plywood in mahogany or teak with maple strips floor
• Exterior synthetic teak:  planks 45 mm wide (at least 8 mm thick)

Mirrors

All mirrors provided and installed are in smooth glass as in the General Arrangement.

Door Handles

Door handles can be selected by the customer from FORESTI E SUARDI mod. 260A.CC or similar, and cylindrical locks and hinges.

Bathroom Fitting and Accessories

• Taps and shower kit are provided and installed in chrome finishing FORESTI ESUARDI mod. LEMANS art. 4280.C - or similar
• Accessories FORESTI E SUARDI mod. CARMEL - or similar
• Sinks are supplied and installed FORESTI E SUARDI mod. FUORI CORNER QUADRO art. L010.BCO - or similar
• Top in Acrylic solid surface
• The shower floors in non-skid flooring

Woods and Laquering

• Woods can be selected by the customer amongst the standard decor and accessories samples at the shipyard showroom
• Lacquered surfaces are to be considered in RAL 9010 color with 50-gloss finish

Toilet Units

Toilet Units Toilets PLANUS mod. Artic plus 24V white. 

Steering station control panels including:

• Start/stop engine switches
• 1x electronic twin engine control handles
• 2x displays (Engines and battery display)
• Winch control
• Riviera Magnetic compass - or similar
• Navigation, position and dashboard light switches
• Horn control
• Filters alarm
• Bilge and open port-holes alarms
• Windshield wash/wipers controls

Flying Bridge Steerng Station

• Winch and anchor washing controls
• Magnetic compass
• Horn control
• Electronic twin engine controls  

The following technical specifications ("Specifications") describe in detail the electrical elements of the Solar Yacht SILENT 80.

All components are marine grade and have a CE certificate, wires copper and tin coated

SILENT 80 has been designed and is built in accordance with the ISO rules and in compliance with the safety standards according to the 94/25/CE directive

All lighting appliances and supplies strictly respond to the M/Y classification rules by FORESTI E SUARDI in chrome finishing. All lights in the same light colour of about 3.000 K

• Type A SEXANT BIG S P-LED 3.6W 10/30VDC 3200/4000° K main spot light ceiling
• Type B MIRA TT P-LED 1, 2 W 10/30VDC 3200/4000° K shower,mirror and external ceiling IP65 spot light
• Type C ANDROMEDA G2 LED 1,2W 10/30VDC 3200/4000° K courtesy light IP67
• Type D VEGA W P-LED 2W 10/30VDC 3200/4000° K reading light
• Type E ELECTRA T LED 0,5W 10/30VDC 3200/4000° K external courtesy light IP67

Batteries, MPPT- charge regulators, solar panels, inverters, e-motors, generator, motor and solar displays.

Charge-, consumption- and capacity controls for all electric circuits

Battery Management System 

Each battery module comes with an integrated battery management system (BMS). This is an intelligent electronic module, that measures all cell voltages and temperatures to control balancing on both battery cell and module level. The battery modules communicate by a galvanic isolated CAN-Bus with the Master BMS, which collects and monitors the status of all battery modules. If the measured values from a battery module exceed the limit, the Master will automatically act to protect the connected battery modules.

Monitoring and control EM-Display monitors and controls all battery systems. The high-resolution display with integrated touch screen shows all important battery parameters at a glance. The integrated Wi-Fi-module will connect the display to the cloud and makes it possible to remotely monitor your systems with our Energy Portal.

Solar Power

64 high-efficiency Sunpower X22 solar-panels in total for propulsion and household 

each 1560 x 1046 mm |   61,42” x 41,18”

each 1,63 m² | 17,56 square foot

Total 104,43 m² | 1.124’’ square foot

MPPT solar charge regulators

Electric Power Storage

High voltage DC Battery for main storage capacity of 200 kWh

Battery compartment blower

Range Extender

Generator as range extender 100 kW (Volvo/ UQM)

Water lock, silencer, gas-water-separator, exhaust tubes, hull fitting

Air hose 

Ventilation grid s/s or in-molded grid at side gunwale

Service Batteries

24 V service batteries

Fresh Water System

• Fresh water tank 1,000L, structurally integrated in the hull or bridge deck, with man-hole
• Fresh water tank 50L, plastic, man-hole for potable water
• Water pump + filter acc. to small flow to fridge / 2nd tap at pantry sink
• Water pump for pantry / separated from bathrooms and stern shower
• Water pressure system - 1x pump (Gianneschi or sim. 50l/min), 1x Tank 5L inox
• 5x small electric water heater - 230 V heating: max. 20 L, for each bathroom
• 2x small electric water heater - 230 V heating: 10 LITERS, for pantry and stern shower
• Shower mixer tap with shower head + rain shower in all bathrooms
• 2x transom shower (warm/cold)
• Integrated stern shower on tender bay hatch when opened with mixer unit
• Acrylic worktop sink for galley
• Sink bathrooms, top mounted, t.b.s
• Taps at bathrooms - all armatures and showers Hans Grohe, Kohler or similar
• Shower drains at bathrooms hidden under acrylic / stone cover
• Deck filler for water
• Tank ventilation and filters
• Maintenance free plastic water hose (Whale or similar)
• Hose clamps all high-quality s/s, for pressurized water, fuel, blackwater and under the waterline all clamps double.

Grey and Sewage Water System

• 4x ca. 500 liters grey water tanks, manhole with aluminum lid, level sensor, all tanks located under the bathrooms
• 4x self-priming 24V Gianneschi pump ECO MV 44E for automatic or manual tank discharge
• 3-way valve for deck discharge
• Deck fitting waste water acc. EN ISO for discharge
• Grey water system connecting tank with washbasins, sinks, showers, bidets, dishwasher and washing machine
• Shower drain kit
• Waste water hoses marine grade, anti-smell type (SeaLand or similar)
• Anti-odor filter on tank's vent  

Bilge and Sewage System

• Self-priming electric bilge pump units at hulls (6x) – t.b.s.
• Bilge alarms next to the bilge pumps
• Manual bilge pump at stern cockpit
• Skin fittings with monitored ball valves (Trudesign)

• Fixed fire extinguisher: 1x generator and aux. installation, 1x at battery compartment, suitable for net space (SEAFIRE)
• Fuel shut-off remote control at helm
• Fire extinguishers in each cabin and salon (7)
• Fire detection units in each cabin and salon (6) (i) Fire blanket for galley

• Rudder shaft stainless steel massive stock
• Rudder stock
• Lower and upper rudder bearing
• Gaiter sealing
• Rudder tube
• Steering pumps on fly helm and salon helm
• Steering pump flange
• Venting valve for steering pump
• Balance valves with bypass function
• Hydraulic rudder cylinders
• Steering wheel - stainless steel polished at flybridge
• Steering wheel - carbon fiber at saloon
• Steering wheel - additional brand logo in wheel center
• Hydraulic tube
• Hydraulic tube support sleeve
• S/S rudder arm and misc. components
• Emergency tiller acc. to CE  

• Fuel deck fill station in-molded in superstructure, covered with a lid
• Fuel tank s/s, manhole, 2 x 1,500 Liters with inspection tubes at tank
• Splash-stop for fuel
• Rising pipes
• Ventilation with smell filter
• Fuel manifold valve
• Diesel pre-filters and 2 x interchangeable generator filter
• Fuel transfer pump with filter
• Electronic level gauge at main dashboard and at deck fill station
• Fuel hose - marine fuel acc. ISO
• Double hose clamps s/s heavy duty

Optional Heat-Pump System

4-6 Grounding plates for AC and DC systems

• Fender profile for hull outside and platform- Tessilmare Sphera (60 mm height)
• Fender profile end fitting
• Anchor bow roller with secure pin
• Padeyes for anchor bridle
• 12 cleats main deck: s/s, 400 mm customized t.b.s.
• Anti-chafing-protection plate s/s at side sill
• Retractable cleats at platform (Seasmart)
• 6x fender pad eyes at aft platform

Engine hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.